1500A peak
Starting power for compatible 12V vehicles.
KIVOZA roadside gear
Jump X1 Pro
R 2,099
R 2,399
Save R 300 · 13% off
One compact device for the roadside moments that can otherwise stop your day.
The Jump X1 Pro combines a 12V vehicle jump starter, cordless air compressor, 12,000mAh power bank and LED emergency light.
- 500A starting current and 1500A peak current
- Inflates up to 9.9 BAR / 150 PSI with preset modes and automatic stop
- For compatible petrol engines up to 6.0L and diesel engines up to 3.5L
- USB power output for phones and portable devices
- Carry bag, intelligent jumper cable, inflation hose, attachments and charging cable included
- 2-year limited supplier warranty against defects in materials and workmanship
For 12V vehicles only. Read and follow the supplied instructions before first use. Not designed for heavy industrial use. Warranty terms apply.
R90 flat delivery within South Africa
Estimated delivery: 3-5 business days
Secure checkout
2-year limited warranty included
For 12V vehicles only. Read the supplied instructions before first use.
150 PSI
Preset inflation with automatic stop.
12,000mAh
Portable power for phones and devices.
2-year warranty
Limited supplier warranty against defects in materials and workmanship.
Four features. One ready kit.
Know exactly what to do.
Learn the four core functions before you need them. The steps below are a quick guide; always follow the instructions supplied with your unit.
01
12V jump starter
Start a flat vehicle battery.
Get back on the road without needing a second vehicle.
-
1
Prepare the vehicle
Switch off the ignition and accessories. Confirm it is a 12V vehicle and that the X1 Pro display shows at least three battery bars.
-
2
Connect correctly
Push the blue intelligent-cable plug fully into the jump-start socket. Connect red to positive (+) and black to negative (-). Start only when the cable LED is solid green; a red LED means the polarity must be corrected.
-
3
Start and disconnect
Start the engine. Disconnect the cable from the battery within 30 seconds once the engine is running and leave the engine running. Recharge the X1 Pro after use.
Good to know: If the green LED flashes, follow the supplied BOOST instructions and start within 30 seconds. Make no more than three attempts in a row and wait two minutes between attempts.
02
Cordless air compressor
Set the pressure and let it stop.
Top up a low tyre with a preset pressure and automatic shut-off.
-
1
Attach the hose
Screw the hose connector firmly into the compressor output, then secure the air clamp to the tyre valve. The display will show the current tyre pressure.
-
2
Choose the target
Hold the power button for two seconds. Hold PRESET for two seconds to choose BAR, PSI or KPA, then use a short press to select SUV, car, bicycle, ball or free mode. Adjust with + or -.
-
3
Start inflation
Press the power button to start pumping. The compressor stops automatically at the selected pressure; press the power button again if you need to stop it manually.
Good to know: The hose connector can become warm. Let it cool before removing it, and never inflate a visibly damaged tyre.
03
12,000mAh power bank
Keep your phone powered.
Use the X1 Pro as backup power for a phone or compatible portable device.
-
1
Connect your cable
Plug the USB end of a compatible cable into the X1 Pro 5V/2.1A USB output and connect the other end to your phone or tablet.
-
2
Switch on the output
Press the X1 Pro power button. The display will show USB and the unit will begin charging the connected device.
-
3
Pack it ready
Disconnect when finished, check the remaining X1 Pro battery level and recharge the unit after use.
Good to know: A full unit can charge an average phone approximately two to three times, depending on the phone battery.
04
LED emergency light
Light the area and stay visible.
Use steady light for visibility or the emergency modes when you need to attract attention.
-
1
Make the scene safe
Move the vehicle safely off the road, switch on the hazards and stay away from moving traffic.
-
2
Switch on the light
Switch on the X1 Pro and press the torch button. Short presses cycle through steady light, strobe, SOS and off.
-
3
Position it securely
Place the unit on a stable, dry surface where it lights the work area without dazzling approaching drivers.
Good to know: Keep the X1 Pro dry and use the light to work safely—not as a substitute for a roadside warning triangle.
Before you need it
Get the Jump X1 Pro
Charge it. Learn it. Keep it ready.
Fully charge the X1 Pro before first use. Recharge it after every jump start and at least once every six months while stored. Keep the complete kit together in its carry bag.
- Charge through the USB-C input using the supplied cable.
- Four solid battery bars indicate a full charge.
- Read and keep the supplied user instructions.
Small device. Serious capability.
The numbers that matter.
Purpose-built for everyday roadside emergencies, weekends away and South African driving.
500A starting current
44.4Wh lithium-ion
9.9 BAR maximum
Carry bag included
For compatible 12V vehicles only. Petrol engines up to 6.0L and diesel engines up to 3.5L. Results vary by vehicle, battery condition and use.
Good to know
Questions, answered.
The practical details before you add the X1 Pro to your boot.
Contact KIVOZACompatible 12V petrol vehicles up to 6.0L and diesel vehicles up to 3.5L.
X1 Pro unit, intelligent jumper cable, inflation hose and attachments, charging cable, carry bag and instructions.
Standard delivery within South Africa costs R90 and normally takes 3-5 business days. Tracking is sent after dispatch.
The 24-month limited supplier warranty covers confirmed defects in materials and workmanship. A qualifying defect reported within the first six months can be resolved by repair, replacement or refund. Supplier-warranty claims from month 7 to month 24 are assessed for an approved repair or replacement. See Shipping, Returns & Warranty for the complete process and exclusions.
Shipping, returns & warranty
Clear support from order to roadside.
KIVOZA delivers within South Africa and supports every Jump X1 Pro with a 2-year limited supplier warranty. Contact us before returning an item so we can give you the correct return instructions.
R90 flat delivery.
One standard delivery rate applies to orders delivered within South Africa.
3-5 business days.
Tracking details are sent after dispatch. Outlying areas and courier delays can take a little longer.
Follow your parcel.
We send your tracking details after the order has been packed and handed to the courier.
Genuine boxed stock
2 years
Limited warranty against manufacturing defects.
The supplier warranty covers confirmed defects in materials and workmanship for 24 months from the original purchase date. Keep your KIVOZA order confirmation and leave the product label and serial information intact.
Contact us within 7 days.
The item must be unused, undamaged and returned with the complete kit and original packaging. You pay the return courier cost. After inspection, an approved refund is sent to the original payment method.
Tell us as soon as possible.
Use the contact form with your order number and clear photos. Keep the product, accessories and packaging together while we confirm collection or return instructions. KIVOZA covers an authorised return for an incorrect or damaged delivery.
We assess the fault fairly.
For a qualifying defect reported within six months of delivery, the available resolution can be a repair, replacement or refund. KIVOZA covers the authorised return. The additional supplier warranty continues from month 7 to month 24 under its stated terms.
What the warranty covers
Confirmed product defects.
- Defects in materials or workmanship during the 24-month warranty period.
- The original purchaser with a valid KIVOZA order confirmation.
- For supplier-warranty claims from month 7 to month 24, an approved repair or replacement.
- Any other remedy that applies to a qualifying claim.
What is not covered
Damage outside a product defect.
- Normal wear, impact damage, water damage, abuse or improper storage.
- Incorrect use, modification or repair by an unauthorised third party.
- Missing or removed product labels, serial information or proof of purchase.
- Damage caused during an unauthorised return shipment.
Return or warranty process
Five simple steps.
- 1Contact us
Send your order number, a short explanation and clear photos or video through the contact form.
- 2Wait for instructions
We will confirm the return address and what must be included. Do not send the unit before this step.
- 3Pack the complete kit
Pack the unit and requested accessories securely so they cannot be damaged in transit.
- 4Assessment
The unit is checked to confirm the fault, condition and available solution.
- 5Resolution
We confirm the approved refund, repair or replacement and keep you updated by email.
If your parcel arrives incorrect or visibly damaged, keep all packaging and contact us immediately.
Start a return or warranty claim